CISCO 500-710 EXAM REVISION PLAN, 500-710 VALID TEST GUIDE

Cisco 500-710 Exam Revision Plan, 500-710 Valid Test Guide

Cisco 500-710 Exam Revision Plan, 500-710 Valid Test Guide

Blog Article

Tags: 500-710 Exam Revision Plan, 500-710 Valid Test Guide, Intereactive 500-710 Testing Engine, 500-710 Exam Vce Format, Reliable 500-710 Braindumps Book

P.S. Free 2025 Cisco 500-710 dumps are available on Google Drive shared by VCE4Plus: https://drive.google.com/open?id=1Q_OFq4nvl5An_qyz16a9QlnpUJZfGTJ3

The web-based Cisco 500-710 practice test software is designed explicitly for the Cisco Video Infrastructure Implementation exam. It is a well-known self-preparation tool that contains 500-710 Exam Questions approved by Cisco Certified Professionals. Our Cisco 500-710 exam questions are periodically updated and are similar to the real Cisco Video Infrastructure Implementation exam questions. The Cisco 500-710 Practice Test has a close resemblance with the actual Cisco 500-710 exam. Multiple This Cisco certification exam needs to be finished in a certain time duration, therefore Cisco 500-710 practice test allows candidates to practice in the allocated time set according to their own needs.

Cisco 500-710, also known as the Cisco Video Infrastructure Implementation Certification Exam, is a test designed to evaluate your knowledge and skills in designing and implementing video infrastructure solutions for enterprises. Cisco Video Infrastructure Implementation certification exam is significant for IT professionals who want to specialize in video collaboration technologies across businesses. The Cisco 500-710 Exam is one of the four tests that lead to the Cisco Video Infrastructure Design Certification.

>> Cisco 500-710 Exam Revision Plan <<

500-710 Valid Test Guide & Intereactive 500-710 Testing Engine

In addition to the 500-710 exam materials, our company also focuses on the preparation and production of other learning materials. If you choose our 500-710 study guide this time, I believe you will find our products unique and powerful. Then you don't have to spend extra time searching for information when you're facing other exams later, just choose us again. And if you buy our 500-710 Study Guide, you will love it.

Cisco 500-710 exam, also known as the Cisco Video Infrastructure Implementation exam, is a certification test that is designed for professionals who want to validate their knowledge and skills in implementing Cisco video infrastructure solutions. 500-710 Exam measures a candidate's ability to configure, implement, and troubleshoot Cisco video infrastructure solutions, including Cisco TelePresence Video Communication Server (VCS), Cisco Expressway, and Cisco Meeting Server.

Cisco Video Infrastructure Implementation Sample Questions (Q17-Q22):

NEW QUESTION # 17
Which two statements about endpoint registration authentication are true? (Choose two.)

  • A. Expressways and endpoints do not need to be synchronized with identical NTP timestamps.
  • B. When a subzone is set for "Treat as Authenticated", the endpoint must have the correct authentications configured.
  • C. Authentication credentials can be stored in the local database of the Expressway.
  • D. SIP endpoints always need authentication credentials.
  • E. The endpoint and Expressway must be configured and synchronized with an NTP server delivering an identical time stamp.

Answer: A,C

Explanation:
* Authentication credentials can be stored in the local database of the Expressway. This is true because the Expressway can use its local authentication database to verify the credentials of incoming requests from devices or external systems1. Alternatively, the Expressway can also use external authentication methods, such as LDAP, SAML, or OAuth1.
* SIP endpoints always need authentication credentials. This is false because the Expressway's authentication policy can be configured separately for each zone, and it can be set to "Do not check credentials" or "Treat as authenticated" for SIP messages from local or non-local domains1. This means that some SIP endpoints may not need authentication credentials to communicate with the Expressway, depending on the zone configuration.
* The endpoint and Expressway must be configured and synchronized with an NTP server delivering an identical time stamp. This is false because the Expressway and the endpoint do not need to be synchronized with identical NTP timestamps for authentication purposes2. However, it is recommended to synchronize the Expressway and the endpoint with the same NTP server for other reasons, such as logging, troubleshooting, and certificate validation3.
* Expressways and endpoints do not need to be synchronized with identical NTP timestamps. This is true because the Expressway and the endpoint do not need to be synchronized with identical NTP timestamps for authentication purposes2. However, it is recommended to synchronize the Expressway and the endpoint with the same NTP server for other reasons, such as logging, troubleshooting, and certificate validation3.
* When a subzone is set for "Treat as Authenticated", the endpoint must have the correct authentications configured. This is false because the "Treat as Authenticated" option means that the Expressway will not verify the credentials and will allow the message to be processed as if it has been authenticated1. This option can be used to cater for endpoints from third-party suppliers that do not support authentication within their registration mechanism1.
References := 1: Cisco Expressway Administrator Guide (X14.0) - Device Authentication 2: Cisco Expressway Administrator Guide (X14.0) - NTP Configuration 3: Cisco Expressway Administrator Guide (X14.0) - Time and Date


NEW QUESTION # 18
Which configuration on the Expressway is needed for a SIP end point to register?

  • A. active neighbor zone between the end point and the Expressway
  • B. SIP authentication enabled
  • C. Registration restriction policy in Allow mode
  • D. SIPdomain

Answer: D

Explanation:
= The Expressway can act as a SIP registrar for up to 200 domains. To make the Expressway act as a SIP registrar, you must configure it with the SIP domains for which it will be authoritative. It will then handle registration requests for any endpoints attempting to register against that domain. To configure a SIP domain on the Expressway, go to Configuration > Domains and click New. Enter the domain name and select whether the Expressway or the Unified CM provides registration and provisioning services for the domain. You can also configure other options such as authentication, encryption, and call policy for the domain. After adding the domain, you must restart the Expressway for the changes to take effect. A SIP endpoint that wants to register with the Expressway must use a SIP URI that matches one of the configured domains on the Expressway. For example, if the Expressway is configured with the domain example.com, the endpoint must use a SIP URI like [email protected] to register with the Expressway. References := Cisco Expressway Administrator Guide (X14.0) - Configuring DomainsCisco Expressway Basic Configuration Deployment Guide (X14.0) - Configuring SIP Domains


NEW QUESTION # 19
Which two statements about the relationship between the Expressway series and the Cisco Unified Communications Manager are true? (Choose two.)

  • A. The Expressway series requires the peering with a Cisco Unified Communications Manager to act as a call-control device.
  • B. The Expressway solution can be peered with a Cisco Unified Communications Manager to allow for greater capabilities.
  • C. The Expressway series only supports SIP-based communications.
  • D. The Expressway series may operate as a standalone call-control solution.
  • E. The Expressway series can never operate as a standalone call-control solution.

Answer: C,D


NEW QUESTION # 20
Which type of API is used to configure settings on the Cisco Meeting Server?

  • A. JSON-RPC
  • B. XML-RPC
  • C. XMP-RPC
  • D. REST
  • E. SOAP

Answer: D

Explanation:
The Cisco Meeting Server (CMS) uses a RESTful API to configure settings on the server. The RESTful API allows the user to perform CRUD (Create, Read, Update, Delete) operations on the CMS resources using HTTP methods such as GET, POST, PUT, and DELETE. The RESTful API also supports JSON and XML formats for the request and response bodies. The CMS web interface and the Cisco Meeting Management (CMM) application use the RESTful API to communicate with the CMS. The other options are not valid types of API for the CMS. References: Cisco Meeting Server API Reference Guide, Cisco Meeting Server Basic API Functions


NEW QUESTION # 21
Which group of items must be configured when adding a Cisco Meeting Server toTMS before the server can be used in scheduled conferences?

  • A. DNS address, numeric ID base, numeric ID quantity
  • B. domain, numeric ID base, numeric ID quantity
  • C. domain, numeric ID base, conference ID range
  • D. MACaddress, numeric ID base, numeric ID quantity

Answer: B

Explanation:
= When adding a Cisco Meeting Server to TMS, you need to configure the following items before the server can be used in scheduled conferences12:
* domain: This is the domain name of the Cisco Meeting Server, which is used to generate the conference aliases and URIs. For example, if the domain is cisco.com, the conference alias will be something like
[email protected]. The domain name must match the domain name configured on the Cisco Meeting Server and the certificates used for secure communication.
* numeric ID base: This is the starting number for the numeric conference IDs that TMS assigns to the conferences scheduled on the Cisco Meeting Server. For example, if the numeric ID base is 1000, the first conference will have the numeric ID 1000, the second conference will have the numeric ID 1001, and so on. The numeric ID base must be unique for each Cisco Meeting Server in TMS and must not overlap with any existing conference IDs in TMS.
* numeric ID quantity: This is the number of numeric conference IDs that TMS can assign to the conferences scheduled on the Cisco Meeting Server. For example, if the numeric ID quantity is 100, TMS can assign numeric IDs from 1000 to 1099 to the conferences on the Cisco Meeting Server. The numeric ID quantity must be sufficient to accommodate the expected number of conferences on the Cisco Meeting Server.
The other options are not required or relevant for adding a Cisco Meeting Server to TMS. The DNS address and MAC address are not used by TMS to identify or communicate with the Cisco Meeting Server. The conference ID range is not a valid parameter for TMS.
References := Connect to TMS, Cisco Meeting Server - Configuration Guides


NEW QUESTION # 22
......

500-710 Valid Test Guide: https://www.vce4plus.com/Cisco/500-710-valid-vce-dumps.html

What's more, part of that VCE4Plus 500-710 dumps now are free: https://drive.google.com/open?id=1Q_OFq4nvl5An_qyz16a9QlnpUJZfGTJ3

Report this page